Welcome, visitor! [ Register | Login

 

Five Ways To Old Kitchen Counters Update

  • Listed: March 9, 2019 8:22 am

Description



In the image above, chalkboard paint and paste wax were used to make soapstone-like counters.

You can find a tutorial about skim-coating counters here. It involves building several forms, mixing and pouring concrete, and moving the new counters into place. This doesn’t give you the long-term durability of full concrete counters, but it achieves the same look without needed to haul large slabs of concrete around. Because it’s wood, this is a fairly easy type of counter to cut and install yourself if you have the right tools.

4 Ways To Update Your Countertops by wikihow.com



A new paint job can breathe new life into your existing countertop. Refer to your brand of paint’s instructions regarding drying times. Also be aware that the paint’s consistency made be adversely affected by extreme weather. Minimize the amount of contact that you will have with the paint itself or its fumes. Expect the paint’s ingredients to separate from each other after sitting on the shelf for so long.


How To Update Your Laminate Countertops Without Replacing Them | Duration 3 Minutes 1 Seconds

Use a high-density, high-quality foam roller to cover large surface areas. Have paper towels and water handy so you can quickly clean up any drips on unwanted surfaces before the paint has a chance to dry. Refer to your paint’s direction to find out how long it needs on average to fully air dry. Periodically test it by gently touching it to feel how tacky it is. Once you’re done, wet a washcloth and wipe the countertop down until it is clean, using additional washcloths as needed. Pour the recommended ratio of cement and water into a disposable container. Instead, make small batches of a couple cups’ worth at a time as you go. For corners, edges, and any other tight spaces, use putty knives. Wide putty knives work best for right angles in corners and where the countertop meets the wall. From there, draw the cement toward you with your putty knife. This may be the most labor-intensive part of the application.

If necessary, use more cement than desired and sand off the excess later, once it dries. Use medium sandpaper to get rid of any noticeably uneven cement. When sanding the first and second coats, don’t worry about making the surface perfectly smooth. When applying new coats of cement, keep an eye out for any areas where the previous coat appears to be thinner than the surrounding area. This will take some time, so if you are sanding by hand instead of a machine, protect your fingers with a pair of thin work gloves. Depending on how powerful it is, it may do too good of a job and end up stripping more cement than desired off of your countertop. Then vacuum the area to remove all of the dust created by sanding. If you’re worried about making a mess, add a new layer of painter’s tape over connecting surfaces and cover the floor with a tarp, sheet, or newspapers. Be sure to include the dimensions of all surface areas to be tiled, including the edges as well as the countertop’s backsplash if you want to keep it. Ask for their recommendations in choosing which type of tile will work best for your situation. If you are looking to create a tiled backsplash on the wall behind the countertop, consider removing the countertop’s backsplash with a reciprocating saw. Give yourself as much access as possible to all sides of the countertop. With water lines, allow any water that may still be in the pipes to empty before starting.

wilsonart 2 Five Ways to Old Kitchen Counters Update

First, use a ruler and level to trace a cutting line along each rounded edge. At the same time, expect your laminate countertop to be made of nonporous materials. Start from the edge farthest from the wall and then lay them out toward the wall, column by column. Then, at the end of each column, trace a line on the countertop along the edge of the last whole tile that will fit before you reach the wall or backsplash. Along each side of the sink, trace a line on the countertop along the edge of the last whole tile that will fit here. Keep its edge flush along the edge of the counter, sink, or angle, so that it overlaps the last whole tile in that row or column. Then use a wet saw or a tile cutter to cut that tile to size. To avoid wasting materials, it’s better to err on the side of not cutting enough on your first try and then trimming off the excess. For tiling, be sure to purchase a latex modified thin-set adhesive. Then use a trowel to spread a thin layer over the surface area. If your countertop was rounded, place ⅛” by 2” shims underneath the tiles that will line the sawed-off edges.



Update Kitchen Countertops On A Budget | Duration 2 Minutes 23 Seconds

As you place each one down, gently push it into the adhesive perpendicular to the combed grooves. After you set each tile down, a tile spacer along each side and corner to create an even line for grout between each pair of tiles. In areas where appliances have been removed, be careful that no edge pieces project over the original countertop, which may interfere with reinstallation. Skim any extra off the top and then use your trowel to smooth the surface. Soaking the sponge again and then wiping the tiles diagonally, being careful to not disturb the grout drying along their sides. Advantages: takes little effort to wash; stands up to abuse (heavy heat, impact, and stains) very well. Popular colors and patterns for laminate include basalt slate, argento romano, and black riftwood. Give your counters a touch of warmth with this earth-toned surface. Advantages: enhances rustic-style homes; easily repairable; can be utilized for food prep; resists stains when varnished. If budget is no concern, consider this higher-end countertop. Invest in a surface that will match the rest of your kitchen, regardless of its aesthetic. Disadvantages: easy to chip and scratch; requires sealing on a regular basis; susceptible to etching and staining from acidic foods. Enjoy a countertop that will requires little to no upkeep and stand up to almost any abuse, with one exception. Disadvantages: can be damaged by heat; corners and edges may chip; difficult to repair. Resurfacing them with cement or tile can do the same while also addressing any damage that its original surface may have suffered in the past. Be sure to buy enough for two coats to ensure the countertop’s original surface doesn’t bleed through once the paint dries. Expect some brands to take as many as three days for all coats to fully air-dry. Plan accordingly, with a guaranteed stretch of consistently ideal weather for as long as the paint needs to dry. Line all other surfaces that connect with the countertop (such as walls and cabinets) with painter’s tape where they meet.Use painter’s tape to secure a tarp, dropcloth, sheet, or other protective covering over the floor. Scrape away any substances that may have dried, congealed, or otherwise stuck to them. Use brushes to coat smaller and/or harder-to-reach areas, like corners and edges, to avoid making a mess. Be aware that environmental factors, like low temperatures or high humidity, may make it take longer. Line the edges of any other surfaces (such as walls, cabinets, and backsplashes) with painter’s tape wherever they meet the countertop. Keep them covered so you don’t have to clean any cement off in case you graze them by accident during application.



Countertops! • Kitchen Remodel Update #6 | Duration 1 Minutes 44 Seconds

Don’t worry about making your countertop smooth, since the cement actually does a better job of sticking to irregular surfaces. Mixing the total amount of cement that you need to complete the project all at once will result in the cement drying before you reach the end of your project. For wide, open areas, use a large drywall trowel to cover the most amount of surface area with less effort. Once you’re done, give the cement a minimum of 24 hours to dry, and more if needed. Wipe the needed amount of cement off onto the painter’s tape covering your wall. Make sure the existing countertop is covered and smooth the cement out as much as possible. Wait another 24 hours for the cement to dry, and repeat the process for a third coat. Simply concentrate on getting rid of any cement that is obviously higher than the surrounding area. Once your final coat has dried, sand your countertop’s new surface down to your desired level of smoothness. Start with coarse sandpaper to get the bulk of the word done quicker. If needed, use your putty knife to chip off any cement that may have sealed it the edge to the countertop. Use a paint roller to apply the sealer over large surface areas. The liquid sealer is very thin and can easily drip or splash over other surfaces.When purchasing sealer for kitchen countertops, double-check if the sealer is food-safe. If not, be sure to keep food from coming into direct contact with the countertop. Bring the dimensions as well as photos of your countertop’s layout to the retailer where you plan to purchase your tile. Once you have purchased your tile, arrange it on your existing countertop to see what it will look like in the end. If you are having any of your tiles precut at the store to line the edges, make sure their sizes are correct. This will create a continuous effect and simplify the project by creating only one right angle to deal with between the wall and countertop. When removing appliances like sinks and stoves, be sure to turn off the water and gas before doing anything else. Also unscrew the covers of any nearby power outlets if you are doing the walls as well. If the edges to your existing countertop are rounded, trim them so they become squared. To keep yourself from going off the mark, create a makeshift cutting guide by using clamps to lock your level into place along the cutting line. Be aware that the adhesive you will be using for your tiles works best with porous surfaces. So, instead of sanding for smoothness, use 50-grit paper to roughen the texture and create an irregular surface with gaps for the adhesive to settle into for a more secure bond. Since areas around the sink can be the trickiest, start here to get the tough part over and done with. If the layout of your countertop includes any angles other than right angles, do the same thing as you reach each angle. For each area where a whole tile won’t fit in the space left at the end of a row or column, place a whole tile over that area. Place a straightedge over where they meet and trace a cutting line along the tile on top. Once each one is cut, set each tile in its place to make sure it fits. Once your outlines have all been made, remove all loose tiles from the countertop. Once you have spread adhesive over the surface area, run the comb over it in one direction to form grooves in the adhesive.



Concrete Countertop Update | How To Clean And Reseal + New Sealer | Duration 5 Minutes 17 Seconds

Then apply mortar the edge of the countertop to ensure that any uneven gaps are filled. Move slowly and purposefully to better ensure that you set them exactly into place. For instance, if you combed the adhesive from left to right, push the tile in toward the back of the countertop. When you reach an area requiring a cut piece of tile, double-check to see if it needs any additional trimming before setting it into place, since the whole tiles may not exactly match your original outline by this time. Once you are done, refer to the adhesive’s directions to find out how long it needs to dry before proceeding. Once it’s mixed and ready to go, plug all gaps between tiles by packing the grout in with a hard rubber float. Repeating as needed until the surface of each tile is perfectly clean. If you’re replacing your countertop with a limited budget, go with the cheapest option: laminate. Opt for a textured surface, rather than a flat one, to better conceal any scratches or other wear and tear that may occur over time. Disadvantages: seams allow water to penetrate under the surface and damage the composite wood underneath; surface scratches easily, which is irreparable. Disadvantages: requires upkeep with regular applications of mineral oil, beeswax, and varnish; easily damaged by heat and moisture; should not be used over a dishwasher or around sinks. Ensure a sense of style with this classic surface that won’t grow out-of-date. Advantages: takes little effort to wash when sealed; scratches are repairable with polishing. Check out various colors of marble to see which pattern and veins you like the most. If you want to be more or less done with your countertop once you install it, go with this long-lasting material. Quartz ranges in color from white and gray to pink, green, or blue.

Hampton Bay 10 Ft. Laminate Countertop In Sea Salt With Tempo Edge by homedepot.com



Does the counter top come with the iron on edge laminate piece that covers the wood look of the edge?

Thank you and we hope you love your new countertops!

Is there a piece to give a finished edge on the cute end that will be exposed?

Trying to keep the work surface as one unbroken top if at all possible. This countertop provides a virtually seamless appearance and the.

DIY Countertop Update: Most Affordable Way To Fake New Countertops by mnmomma.com



Have you been looking for an affordable way to update your kitchen countertops?

A few months ago we moved to our “new to us” home and absolutely love it!

Giani’s paint kit comes with everything you need for this project (except painters tape – get this kind). Giani offers several colors of “granite” to paint your countertops. I didn’t worry about it too much and just made sure my countertops were clean. And everything still worked out great, so don’t try to over analyze this part. Things really shouldn’t be splattering, but just in case you get a little carried away with a sponge or brush – it’s nice to be protected. This painters tape worked like magic and gave us the clean lines we were hoping for. It is not necessary, as the kit comes with it’s own top coat. Here’s the epoxy we used if you’re brave and want to try it. Do not try to scrape extra epoxy out of the bucket as you’re pouring, this ruins your perfectly mixed ratio and can cause sticky spots (this is what we did!

It’s even more expensive if you mess up and have to do it again. Measure the surface area you’ll need to make sure 1 kit will cover your kitchen. Maybe you don’t have the money for a remodel right now or maybe you’re just in the mood for a cheap change. Thankfully, my husband is usually up for my ideas, so we gave it a shot. They were a cream/off white color that was probably original to the house. If you find you run out of a specific color of paint you can always buy more of just that color right here. Make sure you’ve watched the videos and then you start sponging – one color at a time, with light hands.

We did two layers of the third color to brighten our countertops up even more. The only thing left to do was add two coats of the topcoat, which happened to contain gorgeous flecks of glitter. When it works, epoxy really does make your countertops extra beautiful!

Measure the square footage you’ll need to cover your countertops and then measure it again. Buy drop cloths and make sure your floor and cabinets are covered. Don’t try to create a pattern – it looks more natural when you don’t. All babies/children are different and what works for ours may not work best for yours.

Old To New: DIY Laminate Countertop Makeover by mydesignrules.com



I talked all about my plan to make it over on a budget here. The backsplash portion of it had gotten warped by water damage, plus some of the corners had chipped off revealing the particle board underneath. I wanted the look of natural stone, translate: a high-end look on the cheap like always. The stone coating will harden enough cover it all flawlessly. From start to finish, it took me 2 days to complete, but only because of drying time. That included all the sanding, priming, two coats of stone and two coats of sealer.I rolled a cart in the middle of my kitchen for a prep surface in the meantime. Similar to laminate, you must use a cutting board and you can’t put hot surfaces directly onto the surface. Perhaps there’s a number on the product box that you could call for suggestions. Laugh with (or at me) but leave with nuggets of wisdom that will last you a lifetime. To get that ugly memory out of your head, here’s what we’re going for. First, there were burns from a pot my husband sat by the stove without a trivet.

You can purchase laminate to add to the top old counters, but the skill level required seemed way above my pay grade and my power tool arsenal.So after patching the blisters, the stone in the product will hide all the blemishes as it coats the counter. All you have to do is clean the counters, scuff them up a bit with sandpaper, paint on a stone base coat, paint on the stone decorative coating and then add the top sealant. I wrote a review vs a tutorial because it’s really a no-brainer. To make repairs, you fill them in with regular wall spackle prior to priming. And almost everything you need to do the countertops is included in the kit. I was head over heels in love with the matte look before adding the sealer.

wilsonart 2 Five Ways to Old Kitchen Counters Update

You will not be fooled that it’s quartz, but it’s 1000x better than before. I did concrete counters over my old tile countertops and that would be a great option for beat up laminate too!

Since epoxy tends to yellow over time maybe you cokd trya polyurethane.

Hampton Bay 6 Ft. Laminate Countertop In White Cascade With Tempo Edge by homedepot.com



This countertop provides a virtually seamless appearance, and the built-in backsplash provides no crevices where dirt and grime collect. The high definition laminate patterns create the natural beauty of stone. It measured 1/16” under 6’ in the front and 1/ 16” over 6’ in the back. Anyone who has ever cut counter tops understands how difficult this is. The post-formed waterfall edge create a contemporary look perfect for any space.

Kitchen Counter Upgrade by thisoldhouse.com



While we can’t choose your recipes, we can help focus your renovation on the elements that give the most bang for your buck: the countertop and backsplash. Granite tile looks high-end if you finish the edges with a 1½-inch bullnose. Some of the most durable undermounts are made from stainless steel and copper. This stainless sink’s removable drying shelf frees up counter space that would otherwise be occupied by a dish rack.

Take on too much, and the work can mushroom out of control, busting your budget and your patience. Use unsanded grout for tighter joints and a smoother surface that better approximates the look of seamless stone. A backing on these light-reflecting glass subway tiles prevents trowel marks from showing through. Just sweep crumbs and spills into an undermount sink, rather than worry about gunk collecting around a drop-in’s lip. For steel, the lower its gauge, the thicker the basin’s walls.

How To Update A Formica Countertop by moneypit.com



You can easily re-laminate an already laminated countertop. And what you do is you would just use a laminate cutter to cut these to the appropriate size and then use a contact cement and you could adhere it right to the top of your existing laminate countertop. Sorry, we cannot answer questions sent directly via this form. So for a few dollars, you’re going to get something that’s very, very durable; brand spanking new; and easy to do on your own.

You want to make sure it’s properly lined up before you would stick it down to the old one.

No Tags

40 total views, 1 today

  

Listing ID: N/A

Report problem

Processing your request, Please wait....

Leave a Reply